How to Troubleshoot Wake-On-LAN on a Windows Device – Guide

The Wake-On-LAN Tool is a useful feature that works as an internet-based on/off switch for your device. Once defined, you can use it to turn your PC on and off remotely.

When Wake-On-Lan doesn’t turn your device on and off remotely, you can try troubleshooting by reading this article.

1. Enable Wake-On-Lan

If Wake-On-Lan is enabled, you can try to power on your device by pressing the power button. If the device powers on, then the problem is with Wake-On-Lan and not with your device. If the device does not power on after trying to press the power button, then you should check if your network is connected by checking if you can ping a known address. If you are unable to ping a known address or if your network is connected, then there may be a problem with your cable or router. In this case, you will need to contact your provider for assistance. ..

Open the Run Command dialog by pressing Win + R.

Device Manager is a tool that helps you understand and manage your devices. By opening Device Manager, you can see what devices are connected to your computer, how they are working, and where any problems may be.

On the left side of the window, locate the network adapters that are connected to your computer. On the right side of the window, you will see a list of adapters with their status and connection information. To view or change adapter settings, double-click on an adapter from the list on the right. ..

In the Properties window, click the Network Adapter tab. In the Network Adapter Properties window, click the following: -In the Name field, type “Realtek” -In the Type field, type “Network Adapter” -In the Manufacturer field, type “Realtek” -In the Version field, type “8.1.7601.17514”

In the next window, navigate to the Advanced tab and select Turn off Wake-On-Lan from the property options. If you cannot find this option, try clicking a different network adapter in the previous step.

To enable or disable a security feature in Outlook, click the Value drop-down menu in the right-hand pane and select Enabled. ..

When finished, locate Wake on Magic Packet and Wake on a pattern match in the Property options. From there, enable these features as per the previous steps. ..

Click the “WOL & Shutdown Link Speed” property option in the Property options and then set its value to 10 Mbps First.

Press “OK” to close Device Manager and restart the PC. ..

2. Configure power settings

  1. The power settings on your device should be configured to save power.
  2. You can adjust the power settings to save power by adjusting the following: a. The brightness level b. The screen timeout time c. The screen off time

Press Win + X and select Device Manager from the context menu.

In the Properties window, expand the Network adapters option and select the adapter that you want to modify. In the Adapter Properties window, you can change the name, type, and other properties of your adapter.

-Power Saver -Power Button Off -Power Button Sleep To conserve power, turn off your device when you’re not using it and keep your screen off when you’re not interacting with it. To save even more power, disable the power button altogether and have your device sleep when it’s not in use. ..

When finished, close Device Manager and restart your device.

  1. Open the Start menu and type “cmd”
  2. Type “sleep” and hit enter
  3. Change the setting to “off” and hit enter again
  4. Close the Start menu and open your computer’s sleep settings again

Open the Run Command dialog by pressing Win + R.

In the Power Options window, select the desired power plan and click OK. ..

Click the Change plan options button.

The Turn off display option can be set to never with the On battery and connected options.

To configure the computer to sleep when finished using the Put computer to sleep option, follow these steps:

  1. Open the Settings window.
  2. Click on the Power icon.
  3. Under “Put computer to sleep,” select a time for the computer to go to sleep and click on OK.
  4. When finished, close the Settings window. ..

3. Restart or reinstall network drivers

Wake-On-Lan is a feature that allows you to wake up your computer from hibernation or standby. If your network drivers are corrupted, this may not work as expected. To resolve this issue, you can restart or reinstall these drivers.

  1. Open the Device Manager and expand the Network adapters node.
  2. Double-click on the adapter that you want to reset.
  3. In the Properties window, click on the Reset button.
  4. The adapter will restart and you will be able to use it again as if it never happened.

Press Win + X and select Device Manager from the context menu.

The Network adapters option on the left side of the screen expands to show a list of network adapters.

Right-click your computer’s network adapter and select Disable from the context menu. ..

Enable Device and restart the PC

If you are having trouble connecting to the internet, you can try to reinstall your network drivers. Here are the steps to reinstall these drivers: If you’re having trouble connecting to the internet, there are a few things you can do. First, try reinstalling your network drivers. Here are the steps to do that: ..

Open Device Manager and expand Network Adapters. In the Network adapters section, right-click on the adapter that you want to disable and select Disable. ..

Right-click your computer’s network adapter and select Uninstall Network Adapter.

When finished, navigate to the Action tab and select Scan for hardware changes. Restart your PC when the process is complete.

4. Use Windows Troubleshooters

Some troubleshooters that might be helpful in this situation are the Windows Device Manager, which can help you find and fix devices; and the System Restore tool, which can help you restore your computer to a previous state.

  1. Open the Internet Connection Troubleshooter.
  2. Click on the “Internet Connection” tab.
  3. Scroll down to find the “Connection Problems” section and click on it.
  4. Click on the “Fix Internet Connection Problems” button.
  5. Follow the prompts to fix your internet connection problems.

On the Troubleshoot page, click Windows Update. In the left pane, under Available Updates, click View Available Updates. In the right pane, under Installed Updates, click on an update that is listed as being installed. On the Update Details page, under Status, review the information in the Description column and then click on the Install button to install the update. ..

The Internet Connections troubleshooter will start.

  1. Open the Start menu and type “troubleshoot”
  2. Type “netstat” and hit enter
  3. If the network adapter is listed in the results, it will be fixed. If not, you will need to fix the problem first.
  4. Close the netstat window and open it again by clicking on its icon in the taskbar.
  5. Type “ping” and hit enter
  6. If there is a response from your computer, you’re good to go! If not, please follow these steps:
  7. Open a command prompt window and type “ping -c 8192 www.googlebot.com”
  8. The ping command will show you how many packets have been sent from your computer to www.googlebot.com and how many have been received by www.googlebot.com

Open the Troubleshooting window according to the steps that you followed in the previous section.

The network adapters troubleshooter will start.

  1. Open the Start menu and type “cmd”.
  2. Type “netstat -an” and press Enter.
  3. The netstat output will show you all of your computer’s incoming connections. You can use this information to identify which connections are causing problems and to fix them.

Open the Troubleshooting window according to the steps that you followed in the previous section.

The inbound connections troubleshooter will start.

Restart your computer to apply all these changes.

5. Enable Net BIOS over TCP/IP Feature

NetBIOS is a networking feature that allows computers on a local network to communicate with network hardware and transmit data over the network. Meanwhile, the NetBIOS over TCP/IP networking protocol allows legacy computer applications that rely on the NetBIOS API to be used in modern TCP/IP networks. ..

If your computer is using the NetBIOS API, or you’re not sure, it might be worth enabling the NetBIOS over TCP/IP feature to avoid network problems when using Wake-On-Lan. ..

  1. On your device, open Settings.
  2. Under Network & Internet, tap Wi-Fi.
  3. Tap the name of your wireless network.
  4. Tap the Advanced button.
  5. Under the TCP/IP section, tap Enable NetBIOS over TCP/IP (or Disable if you don’t want to use it).
  6. Enter your network’s password and tap OK to save your changes.
  7. If you have a printer connected to your network, you may need to set up port forwarding on your router for printing over TCP/IP using NetBIOS over TCP/IP (see instructions below). ..

Open the Run Command dialog by pressing Win + R.

The Network Connections window will open.

In the Properties window, click the Network Adapter tab. In the Adapter Properties window, click the following: -In the Name field, type “Intel(R) 82579LM Gigabit Ethernet Controller” -In the Type field, type “Ethernet” -In the Speed field, type “Gigabit” -In the Latency field, type “0” The adapter should now be listed as an Ethernet device.

This command opens a dialog box that allows you to change the Internet Protocol version 4 (TCP / IPv4) settings on your computer.

In the next window, click on the button.

In the Advanced TCP/IP Settings window, navigate to the WINS tab and check the box to enable NetBIOS over TCP/IP.

After clicking OK, you’ll see the changes you’ve made appear in the document. ..

6. Edit Windows registry

To troubleshoot the Wake-On-Lan feature on your Windows computer, you can make some edits to the Windows Registry. Let’s find out how: ..

Type “cmd” and press Enter. Type “netstat -an” and press Enter. You should see a list of open ports on your computer. ..

Regedit is a tool that can be used to change the settings of your computer. By using Regedit, you can add or remove programs, change the settings of your computer’s security and privacy features, and more.

Find the text you are looking for in the document.

To wake your computer from sleep using the S5WakeOnLAN feature, type the command into the next screen and press the Find Next button. ..

To enable Wake-on-LAN on your Samsung Galaxy S5, double-click the S5WakeOnLAN value in the System Settings menu and set the value to 1. ..

  1. Window title: "
  2. Caption: "
  3. Data: 1

Close Registry Editor and restart your computer when finished. ..

  1. Add a new value in the same location and then set your data to 1.
  2. Set your value data to 1 in the editor’s console.
  3. Go back to the editor and change the value of the field to 2.

To change the S5WakeOnLAN value on your Samsung Smart TV, navigate to the folder / key containing the S5WakeOnLAN value and change it to “on”.

Right-click anywhere in the right-hand pane, select New, and select DWORD Value (32-bit). In the New DWORD Value dialog box, type DisableTaskbarButtons and click OK. ..

Press the new key AllowWakeFromS5 to enable the feature. ..

The AllowWakeFromS5 value in Registry Editor can be used to allow the WakeOnLAN feature on a computer to wake up from sleep. This value can be used in conjunction with the WakeOnLAN property in the Computer Configuration\Windows Settings\Security and Privacy\Advanced settings of the computer.

Double-click the new key, set the value data to 1 and click OK. Close Registry Editor and restart your PC when finished.

Please share this article if you like it!

Final note

This guide will show you how to troubleshoot Wake-On-LAN issues on a Windows device. If you have any questions about this article, feel free to ask us in the comments. Additionally, please share this article with your friends to help spread the word! ..