1. Open the Settings app and navigate to the flashlight section.
  2. Toggle on the flashlight by pressing and holding down on the power button for 3 seconds.
  3. When the flashlight is turned on, press and hold down on the home button for 3 seconds to turn it off.

Steps to fix iPhone camera or flash Not Working issue

Fix iPhone Camera not Working issue

Step 2: Open the Camera app and tap the “Mode” button. Step 3: Select “Auto-Focus” and then press the “OK” button. Step 4: Point the iPhone’s camera at what you want to photograph and press the " shutter " button to take a picture. ..

Step 3: If the camera still functions well, take a photo of your subject and compare it to the photo you took before. If there is a difference, then the camera may have been defective and needs to be replaced.

If the photo is blurred, you can clean the front and back lenses using a microfiber cloth. If you observe any dirt inside the lens, you can contact Apple for support.

If you have an iPhone, it needs to be restarted in order to continue using the app.

Fix iPhone Flash not Working issue

Some iPhone owners have had trouble with their camera flash, which is not timed with the photograph. Additionally, some iPhone owners claim that the flash on their device is not working correctly. As a result, photos taken with the iPhone camera flash may look dark or black.

Step 2: If your iPhone is not in a case or bumper, hold it so the screen is facing down. Step 3: Use a blunt object like a hammer to hit the bottom of the phone on all four corners at once. If your iPhone is in a case or bumper, remove it. If your iPhone is not in a case or bumper, hold it so the screen is facing down. Use a blunt object like a hammer to hit the bottom of the phone on all four corners at once. ..

Step 2: Ensure the flash lens is clean and free from any obstructions. Use a polishing cloth to clean it.

Step 3: Tap the lightning bolt in the upper left of the screen and make sure the flash is on.

If your iPhone has stopped working, follow these steps to restart it:

  1. Press and hold the Home and Power/Sleep buttons on your iPhone.
  2. If your iPhone starts up normally, you may need to press and hold the power button for a few seconds to restart it.
  3. If your iPhone doesn’t start up normally, you may need to press and hold the home button for a few seconds to restart it.

To turn on the flashlight from the control center, first ensure that your camera’s flash is working by turning it on from the main menu. If both devices work well, your flashlight should also be activated. ..

To disable location services on your device, go to Settings and select Privacy. From here, tap Location services and turn it off on the Camera app. ..

Final Words

If you have an iPhone and your camera or flashlight is not working, here are a few tips to help:

  1. Reset the iPhone to its factory settings. This can be done by going to Settings -> General -> Reset -> Reset everything.
  2. Check if there is a software update available for your iPhone that can fix the camera or flashlight issue. If there isn’t, you may need to reach out to a reputable iPhone repair shop for help.